![]() If there is a floor above, it becomes the current floor. Select Build> Floor> Delete Current Floor to remove the current floor from the plan.The Wall Height includes the thickness of this slab. Note: If the Wall Height is at least 6 feet (1800 mm), a slab floor is generated above the footings and inside the foundation walls. In Home Designer 2019 and prior program versions, dynamic defaults were instead controlled using a Default checkbox to the right of each setting.To dynamically link this option to the default value for the current floor again, click once on the wrench icon to restore the red checkmark. ![]() Notice that the wrench icon loses its red checkmark when a non-default value is specified.Change the Finished Ceiling value and either click in another field or press the Tab key to update the dialog.This indicates whether or not each option is set to use the default values for this floor. Notice the wrench icon on the right side of each of the height fields.On the Structure panel of the Room Specification dialog, you can specify the Ceiling Height, Floor Height, and other values just as you can in the Floor Defaults dialog.With the room selected, click the Open Object edit button.When a room is selected, the space within it will be highlighted. Using the Select Objects tool, click in an empty space in a room to select it. ![]() Select Build> Wall> Straight Interior Wall and create a new interior wall for our second floor as illustrated below.In this case, you don't want to make any changes, so choose Cancel to exit this dialog without saving your changes.You can then specify lower or dropped ceilings as needed on a room by room basis in the Room Specification dialog once rooms are defined. Set the default Ceiling Height for each floor to the highest ceiling on that floor level. To open the defaults dialog for a given floor, you must go to that floor in plan view. In Home Designer version 2019 and prior program versions, only the Floor Defaults dialog for the current floor was listed in the Default Settings dialog. ![]() Here, the Floor 2 Defaults dialog box is opened.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |